Nöjda kunder i hela Norden
  Snabb leverans (1-3 dagar)

FRS-6700

Contact us for price and delivery
Product reminder

Enter your e-mail address below and we will notify you when the product is available! Your e-mail address will be stored up to 180 days.

Product Description:

FLEX-6700 for the Most Demanding Amateur


The FLEX-6700™ is for the most demanding amateur radio operator who desires the ultimate on-air experience.  With dual spectral capture units (SCUs), the FLEX-6700 allows multiple active antennas providing reception and unprecedented spectrum visibility across up to eight panadapters and waterfalls. The FLEX-6700’s dual-stage RF preamplifiers enhance weak signal reception up through six meter and two meter bands*.  Total flexibility and the highest performance sets the FLEX-6700 apart from other radios.


*Two meter transmit power limited to -15 to +7 dBm; external power amplifier not included.


Features


FLEX-6700 Feature Highlights



  • Maximum Slice Receivers:  Eight (8)

  • Maximum Panadapter Bandwidth:  14 MHz

  • Antenna Connectors:  SO-239×2; BNCx2; XVTR-BNCx1

  • Wideband Frequency Coverage:  30 kHz – 72 MHz; 135 – 165MHz

  • Transmit Frequency Coverage:  160-6m amateur bands, 100W nominal output

  • Transverter IF Frequency Coverage*:  100 kHz – 72 MHz; 135 – 165MHz

  • Digital Audio Exchange (DAX) Channels:  Eight (8)

  • DAX IQ Channels/Bandwidth per Channel (DAXIQ):  Four (4) @ 24 kHz – 192 kHz

  • Preselectors:  160 – 2m (except 60m)

  • Microphone Connectors:  Unbalanced 8-pin Foster, Balanced XLR/TRS

  • Antenna Tuner Unit (ATU):  Integrated

  • Full Continuous Coverage Transmit: MARS/CAP Capable


Specifications


Receiver Specifications



  • Receiver Architecture: Direct Digital Sampling

  • Spectral Capture Units: Two (2)

  • Maximum Slice Receivers: Eight (8)

  • Maximum High Resolution Spectrum Displays: Eight (8)

  • Maximum Panadapter Width:  14 MHz

  • ADC Resolution: 16-bits

  • ADC Sampling Rate: 245.76 Msps

  • Wideband Frequency Coverage: 30 kHz – 72 MHz; 135 – 165 MHz

  • DAX IQ Channels / Bandwidth Per Channel:  Four (4) @ 24 kHz – 192 kHz

  • DAX Audio Channels:  Eight (8)

  • Amateur Band Preselector Coverage: 160m – 6m (except 60m)

  • Preamplifiers / Attenuators: -10 to +30 dB

  • Spurious and Image Rejection Ratio: 100 dB or better

  • External Powered Speaker Output Impedance Level: 600 Ohm Stereo Unbalanced


Transmitter Specifications



  • Transmitter Architecture: Direct Digital Up-conversion

  • TX DAC Resolution: 16-bits

  • TX DAC Sampling Rate: 491.52 Msps

  • RF Output Power: 1-100W nominal SSB, CW, FM, RTTY, Digital; 1-25W nominal AM

  • Amateur Band Coverage at Rated Power Output: 160m – 6m

  • Low Pass PA Filter Bands: 1.8 MHz – 30 MHz continuous, 50 MHz – 54 MHz

  • Transverter IF Output Power: +0 dBm Typical; +15dBm max (+8 dBm, 2m)

  • Transverter IF Frequency Coverage: 100 kHz – 72 MHz; 135 MHz – 165 MHz

  • Modulation System: Digital Low Power at Carrier Frequency

  • Maximum FM Deviation: ±5 kHz

  • DAX Transmit Channel:  Yes

  • Carrier / Unwanted Sideband Suppression:  <-80 dBc typ / <-80 dBc typical

  • Harmonic Radiation 1.8 – 50 MHz Amateur Bands:  <-60 dBc; -70 dBc 6m

  • Transmit Bandwidth: Default 100-2900 Hz (Variable 50-10000 Hz)

  • Microphone Connectors: Unbalanced 8-pin Foster, Balanced XLR/TRS

  • Microphone Impedance: 600 Ohms Nominal (200-10kΩ)


Antenna Tuner Specifications



  • Matching Range 80m – 10m: 8.3 Ohms – 300 Ohms

  • Matching Range 160 and 6m: 16.7 Ohms – 150 Ohms


General Specifications



  • USB 2.0 Ports (peripheral control): Two (2)

  • Master Clock Frequency: 983.04 MHz

  • Master Clock Phase Noise: -147 dBc@ 10 kHz; -152 dBc@ 100 kHz

  • 10 MHz Reference Clock Stability: 0.02ppm OCXO

  • GPSDO Frequency Stability (GPS locked)*: 5 x 10 (-12) over 24 hours

  • Emission Modes: USB, LSB, CW, RTTY**, AM, Synchronous AM, FM, NFM, DFM

  • Frequency Resolution: 1 Hz min.

  • Antenna Connectors: SO-239×2, BNCx2, XVTRx1

  • Antenna Impedance (w/o tuner): 50 Ohm Unbalanced


Electrical



  • Power Supply Requirements: +13.8V DC nominal ±15%

  • Current Drain (Receive/Transmit Max): 3A / 23A @ 13.8V


Mechanical



  • Height: 4″ (10.2 cm) with feet; 3.5″ (8.9 cm) without feet attached

  • Width: 13″ (33 cm)

  • Depth: 12″ (30.5 cm) or 13″ (33.04 cm) with front handles

  • Weight: Approximately 13 lbs. / 5.9 kgs

  • Operating Temperature: 0 to +50 degrees C; +32 to +122 degrees F


Options



  • 2U, 19inch (48.26 cm) Rack Mounting Kit

  • Front Handle Kit (adds 1 inch/2.5 cm to total depth

  • GPSDO with Rear Panel 10 MHz Reference Output


 


Specifications subject to change without notice.

* Requires optional GPSDO module

** Requires 3rd party software.




Item ID:
6700

Documents:
attachment Broschure (Eng)
Recommended accessories for this item
Produced by: Wikinggruppen

The product has been added to your cart