Nöjda kunder i hela Norden
  Snabb leverans (1-3 dagar)

1500 Legal limit tuner

Contact us for price and delivery
Product reminder

Enter your e-mail address below and we will notify you when the product is available! Your e-mail address will be stored up to 180 days.

Product Description:

MFJ-989D 1500 W Legal Limit Tuner


This world-famous 3 KW MFJ-989D VersaTuner V features two massive transmitting capacitors and a roller inductor with a three digit counter. A roller inductor lets you tune your SWR down to the absolute minimum--something a tapped inductor tuner just can't do. A 3 digit turns counter plus a spinner knob gives you precise inductance control -- so you can quickly retune to your favorite frequency. You won't have arcing problems with this roller inductor. That's because firm springs put considerable pressure on a plated contact wheel. This gives you excellent electrical contact with the roller inductor wire and eliminates arcing problems. Wide low inductance straps are used for high current connections. A new core gives you excellent RF properties for minimum loss. Ball bearings on both the front and back shafts give you a velvet smooth vernier feel. Steel end plates and steel shafts give you lifetime durability. This High-Q roller inductor is mounted horizontally and centered vertically away from metal surfaces to maintain highest Q for maximum efficiency so you'll get full power out.


With three continuously variable components--two variable capacitors and a roller inductor--you get the widest matching range and the most precise control over SWR possible. You can tune your SWR down to the absolute minimum from 1.8 to 30 MHz, including MARS and the WARC bands. Plus you have complete control over Q. You can select a low Q when you want convenient broadband coverage or select high Q when you need an extra measure of harmonic attenuation--it's your choice.


You get a super heavy duty balun for balanced lines. It's made with two giant 2 inch powder iron toroid cores and wound with teflon wire connected to high voltage ceramic feed thru insulators. It lets you operate high power into balanced feed lines without core saturation or voltage breakdown.


You get a two wafer ceramic antenna switch with extra large switch contacts to eliminate plugging and unplugging antennas. It lets you select two coax antennas direct or through the tuner, balanced line or random wire and dummy load. Plus you get a built-in 50 ohm 300 watt dummy load that makes exciter tuning fast and easy.


Frequency range is 1.8 to 30 MHz. The peak and average reading cross-needle SWR/power meter has forward power ranges of 200 and 2,000 watts. The back panel has outputs for two coaxial cables, one wire or balanced line and dummy load are provided. Lighted meter with on/off switch (Light uses 12 VDC or 110 VAC with optional MFJ-1312D). Size:  12.25 x 6 x 11.75 inches




Item ID:
MFJ-989D

Documents:
attachment Manual
Produced by: Wikinggruppen

The product has been added to your cart