USB till parallell adapter (pin) 0,5 m
This cable plugs into the USB port on the back of the FLEX-6000 series radios to connect to devices requiring a parallel connection. This functionality requires SmartSDR version 1.10 or later.
The cable is terminated by ten individual wires with single pole connectors which can be interfaced to a male header. Cable signals are compliant with CMOS logic at 3.3 volts. The cable is 0.5M is long.
Please review some of the hardware that this can be used with at: https://www.flexradio.com/downloads/usb-cable-interface-guide-pdf.
