Nöjda kunder i hela Norden
  Snabb leverans (1-3 dagar)

40-6 m OCFD antenna

1 495 kr
Available
Not available
Only a few left (1 items)
Not available
Product reminder

Enter your e-mail address below and we will notify you when the product is available! Your e-mail address will be stored up to 180 days.

Product Description:

MFJ-2012 OFCD antenna for 40,20, 10 and 6 meter 1500 W PEP CW/SSB


Power-Lite™ for 40, 20, 10 and 6 Meters, handles maximum legal limit 1500 Watts PEPCW/SSB. 

This is the robust high-power version of the MFJ-2010 with 14-gauge stranded copper wire and porcelain end insulators. Pull-tested to 200 pounds. 
Engineered from the ground up, innovative new antennas by K1BQT break traditional OCFD design barriers to deliver wider bandwidth, lower SWR, solid gain, and full-frequency agility without a tuner!  Power-Lite™ for 40, 20, 10 and 6 Meters, handles maximum legal limit 1500 Watts PEPCW/SSB. This is the robust high-power version of the MFJ-2010 with 14-gauge stranded copper wire and porcelain end insulators. Pull-tested to 200 pounds. Engineered from the ground up, innovative new antennas by K1BQT break traditional OCFD design barriers to deliver wider bandwidth, lower SWR, solid gain, and full-frequency agility without a tuner! How good are they? W4ILV bought an MFJ-2012 and wrote EHAM, “. . . the best wire antenna I’ve ever used!” We think you’ll agree, and here’s why: 



Highest Efficiency:
 Full-sized radiator with MatchmakerTM feed block that tests over 98-percent efficient. All your power gets radiated!



Best Match: NEC-modeled element delivers the same feed-point impedance on every band. Innovative new transformer designs yield exact ratio needed for a great match. 



Super Balun:
 OCFDs need good baluns to block feedline radiation. Built-in bifilar-wound Guanella current-choke has over 30 dB of common-mode rejection on all bands. Kills pattern irregularities, RFI, noise.



Real Gain: Delivers a 6-dBi ground-rein-forced dipole pattern on the fundamental and a 9-dBi full-wave cloverleaf on the second harmonic. You get an amazing (up to) 11.5 dBi peak gain on higher bands. 



Height Compensation:
 Element feedpoints are compensated for typical mounting height, so you always get lowest possible SWR on all bands!



Frequency Compensation: Normally, a OCFD cut for 3.85 MHz resonates on 7.7 MHz. Ourunique OCFD design resonates mid-band on both 75/40! 



Built to Last:
 UV-resistant marine-ABS feedblocks, stainless hardware, and Teflon® SO-238 connector ensure maximum protection from the environment. 



Easy-to-Install:
 Installs in flat-top or inverted-Vset-up, feedblock has attachment points for tower or tree support. Suggested height is 35-70 feet.



Low Cost: Outperforms multi-band vertical antennas by a wide margin for an unbelievable fraction of the cost!




Item ID:
MFJ2012

Documents:
attachment Manual (Eng)
Produced by: Wikinggruppen

The product has been added to your cart